Skip to content
Loading…
This layer is editable and shared with the public. To prevent unwanted editing, unshare this item or approve it for public data collection.
Finish setting up your layer
Describe your item below. Add fields on the Data tab. Configure editing on the Settings tab. Configure drawing and pop-ups through Map Viewer or Visualization tab.

This US EPA feature layer is updated hourly and reflects the latest hour of air quality data received from monitoring sites that report to AirNow. A brief summary of the item is not available. Add a brief summary about the item.

‎Feature layer by

Item created: Apr 2, 2019 Item updated: Nov 14, 2024 View count: 14,303,216

Snapshot last refreshed:

1902 characters left.

Description

This United States Environmental Protection Agency (US EPA) feature layer represents monitoring site data, updated hourly concentrations and Air Quality Index (AQI) values for the latest hour received from monitoring sites that report to AirNow.

Map and forecast data are collected using federal reference or equivalent monitoring techniques or techniques approved by the state, local or tribal monitoring agencies. To maintain "real-time" maps, the data are displayed after the end of each hour. Although preliminary data quality assessments are performed, the data in AirNow are not fully verified and validated through the quality assurance procedures monitoring organizations used to officially submit and certify data on the EPA Air Quality System (AQS).

This data sharing, and centralization creates a one-stop source for real-time and forecast air quality data. The benefits include quality control, national reporting consistency, access to automated mapping methods, and data distribution to the public and other data systems.
 
The U.S. Environmental Protection Agency, National Oceanic and Atmospheric Administration, National Park Service, tribal, state, and local agencies developed the AirNow system to provide the public with easy access to national air quality information. State and local agencies report the Air Quality Index (AQI) for cities across the US and parts of Canada and Mexico.
 
AirNow data are used only to report the AQI, not to formulate or support regulation, guidance or any other EPA decision or position.

About the AQI

The Air Quality Index (AQI) is an index for reporting daily air quality. It tells you how clean or polluted your air is, and what associated health effects might be a concern for you. The AQI focuses on health effects you may experience within a few hours or days after breathing polluted air. EPA calculates the AQI for five major air pollutants regulated by the Clean Air Act: ground-level ozone, particle pollution (also known as particulate matter), carbon monoxide, sulfur dioxide, and nitrogen dioxide. For each of these pollutants, EPA has established national air quality standards to protect public health. Ground-level ozone and airborne particles (often referred to as "particulate matter") are the two pollutants that pose the greatest threat to human health in this country.

A number of factors influence ozone formation, including emissions from cars, trucks, buses, power plants, and industries, along with weather conditions. Weather is especially favorable for ozone formation when it’s hot, dry and sunny, and winds are calm and light. Federal and state regulations, including regulations for power plants, vehicles and fuels, are helping reduce ozone pollution nationwide.

Fine particle pollution (or "particulate matter") can be emitted directly from cars, trucks, buses, power plants and industries, along with wildfires and woodstoves. But it also forms from chemical reactions of other pollutants in the air. Particle pollution can be high at different times of year, depending on where you live. In some areas, for example, colder winters can lead to increased particle pollution emissions from woodstove use, and stagnant weather conditions with calm and light winds can trap PM2.5 pollution near emission sources. Federal and state rules are helping reduce fine particle pollution, including clean diesel rules for vehicles and fuels, and rules to reduce pollution from power plants, industries, locomotives, and marine vessels, among others.

How Does the AQI Work?

Think of the AQI as a yardstick that runs from 0 to 500. The higher the AQI value, the greater the level of air pollution and the greater the health concern. For example, an AQI value of 50 represents good air quality with little potential to affect public health, while an AQI value over 300 represents hazardous air quality.

An AQI value of 100 generally corresponds to the national air quality standard for the pollutant, which is the level EPA has set to protect public health. AQI values below 100 are generally thought of as satisfactory. When AQI values are above 100, air quality is considered to be unhealthy-at first for certain sensitive groups of people, then for everyone as AQI values get higher.

Understanding the AQI

The purpose of the AQI is to help you understand what local air quality means to your health. To make it easier to understand, the AQI is divided into six categories:

Air Quality Index
(AQI) Values
Levels of Health ConcernColors
When the AQI is in this range:..air quality conditions are:...as symbolized by this color:
0 to 50GoodGreen
51 to 100ModerateYellow
101 to 150Unhealthy for Sensitive GroupsOrange
151 to 200UnhealthyRed
201 to 300Very UnhealthyPurple
301 to 500HazardousMaroon

Note: Values above 500 are considered Beyond the AQI. Follow recommendations for the Hazardous category. Additional information on reducing exposure to extremely high levels of particle pollution is available here.

Each category corresponds to a different level of health concern. The six levels of health concern and what they mean are:
  • "Good" AQI is 0 to 50. Air quality is considered satisfactory, and air pollution poses little or no risk.
  • "Moderate" AQI is 51 to 100. Air quality is acceptable; however, for some pollutants there may be a moderate health concern for a very small number of people. For example, people who are unusually sensitive to ozone may experience respiratory symptoms.
  • "Unhealthy for Sensitive Groups" AQI is 101 to 150. Although general public is not likely to be affected at this AQI range, people with lung disease, older adults and children are at a greater risk from exposure to ozone, whereas persons with heart and lung disease, older adults and children are at greater risk from the presence of particles in the air.
  • "Unhealthy" AQI is 151 to 200. Everyone may begin to experience some adverse health effects, and members of the sensitive groups may experience more serious effects.
  • "Very Unhealthy" AQI is 201 to 300. This would trigger a health alert signifying that everyone may experience more serious health effects.
  • "Hazardous" AQI greater than 300. This would trigger a health warnings of emergency conditions. The entire population is more likely to be affected.
AQI colors

EPA has assigned a specific color to each AQI category to make it easier for people to understand quickly whether air pollution is reaching unhealthy levels in their communities. For example, the color orange means that conditions are "unhealthy for sensitive groups," while red means that conditions may be "unhealthy for everyone," and so on.

Air Quality Index Levels of Health ConcernNumerical
Value
Meaning
Good0 to 50Air quality is considered satisfactory, and air pollution poses little or no risk.
Moderate51 to 100Air quality is acceptable; however, for some pollutants there may be a moderate health concern for a very small number of people who are unusually sensitive to air pollution.
Unhealthy for Sensitive Groups101 to 150Members of sensitive groups may experience health effects. The general public is not likely to be affected.
Unhealthy151 to 200Everyone may begin to experience health effects; members of sensitive groups may experience more serious health effects.
Very Unhealthy201 to 300Health alert: everyone may experience more serious health effects.
Hazardous301 to 500Health warnings of emergency conditions. The entire population is more likely to be affected.

Note: Values above 500 are considered Beyond the AQI. Follow recommendations for the "Hazardous category." Additional information on reducing exposure to extremely high levels of particle pollution is available here.

An in-depth description of the item is not available.

Layers

Ground Layers

Tools

Tables

Basemap

Project Contents:

Solution Contents

Contents

Layers

Screenshots

Terms of Use

Access constraints: None. Security classification: Public. Use constraints: None. Please check sources, scale, accuracy, currency and other available information. Please confirm that you are using the most recent copy of both data and metadata. Acknowledgement of the EPA would be appreciated. Contact Us.

No special restrictions or limitations on using the item's content have been provided.

Comments (3)

Sign in to add a comment.

swakamiya@nps.gov_nps Item Owner commented 3 years ago Delete Reply

Is it possible to get the low cost sensor data in this layer as well like on the https://fire.airnow.gov/ site?

GabrielFM Item Owner commented 2 years ago Delete

I second that request!

mpaulk_ucirvine Item Owner commented 3 years ago Delete Reply

Is there any way to capture older data? I need data for late October/early November in Southern California.

Item Information

LowHigh

Item Information

LowHigh

Make your item easy to find, understand, and use by providing this information.

    Details

    Dashboard views: Desktop

    Creating data in:

    Published as:

      Other Views:

        Dependent items in the recycle bin

          Applicable: 2d

          Data updated: Feb 22, 2025, 1:46 AM

          Schema updated: Feb 22, 2025, 1:46 AM

          Size: 0 KB

          Attachments size: 0 KB

          ID: 2d718d2733a74d1689d72b922c0ac4f4

          Image Count: 0

          Image Properties

          Layer Drawing

          Using tiles from a cache

          Dynamically from data

          Share
          Owner

          OAR_OAQPS_EPA

          Folder

          Categories

          Air

          Assign Category
          Credits (Attribution)
          No acknowledgements.

          US EPA, Office of Air and Radiation, Office of Air Quality Planning and Standards (OAQPS)

          URL View
          WMTS View
          Loading…